Skip to main content

Month: November 2020

Emergency Plumbing: What to Do with a Leaky Pipe

A leaky pipe is one of the most common plumbing issues people face. However, very few people know the proper way to go about fixing one. Worse, in a plumbing emergency, every second counts, which can make matters even more stressful if you don’t know what you’re doing. 

Cummings Plumbing Heating and Cooling, a plumbing and HVAC company based in Tucson, Arizona, provide their expertise on fixing pipes. The company specializes in repairing and installing all types of units, including plumbing, heating, and cooling systems. 

Step One: Turn Off the Water Supply Valve 

According to Cummings Plumbing, the very first step in fixing a leaky or burst pipe should be to turn off the water supply valve. Before starting to fix the problem, you first need to ensure that no water is going to spurt out at you, so locating and switching off the supply water valve is a must. If you aren’t sure which water supply valve supplies the water to the specific pipe that is leaking, then it’s best just to shut off the main supply valve for the time being. From there, you can buy yourself some time until a plumber arrives. 

Step Two: Clean Up the Mess

Whether you have a minor leak with drops of water slowly seeping out or a sudden burst resulting in a small flood in your kitchen, cleaning up the mess should be the second step in fixing your leaky pipe. Cummings Plumbing Heating and Cooling of Tucson, Arizona, recommends not only cleaning up the bottom of the cabinet where the water might be concentrated, but also the leaky pipe itself and any surrounding fixtures. Further, you’ll want to mop up the floor if any water has spread there and clear out the cabinet and surrounding areas where your plumber will have to work. 

Step Three: Assess and Smooth Out the Leaky Pipe

Now that the area is clean, it’s time to prepare your leaky pipe for your temporary patch. Before you patch up a leaky pipe, you must take time to assess and properly prepare the area for the patch. This includes checking to make sure there is no rust, limescale, or rough edges on the surface of the pipe, as well as using sandpaper to smooth out any build up on the pipe. This will not only be good for your pipes in the long term, but it will make your temporary patch more effective and give it a better chance of holding up against water flow, should you need to turn your water back on before a plumber can fix it. 

Step Four: Seal the Leak Via a Temporary Patch

The fourth and final step regarding what to do with a leaky pipe is to seal the leak using a temporary patch. If you don’t have time to wait for a plumber and want to take matters into your own hands, Cummings Plumbing of Tucson, Arizona, recommends temporarily sealing the pipes by using plumber’s epoxy, available at most local hardware stores. All you need to do before applying it to your pipe is to mix it according to the manufacturer’s instructions. 

Remember to mold the silly putty-like epoxy to fit the gap in your pipe exactly. Then, smooth out the edges and let it dry for however long as the instructions dictate. Applying this seal or patch is a great way to fix the problem temporarily; however, it isn’t a long term solution. While doing the proper research, including reading articles like these, can help you temporarily fix a leaky pipe on your own, it is possible to make things worse if you don’t know what you’re doing. Thus, if you’re ever unsure of your DIY plumbing skills, it is highly recommended that you call a professional. 

Top DIY Plumbing Mistakes

Who doesn’t love a “do it yourself” project? Most people are intrigued by the idea of taking on a DIY task, especially one that might save them money and help them learn something new along the way. However, when it comes to the complicated art of plumbing, taking a DIY approach can be an unmitigated disaster, especially if you fail to do the necessary research in advance. 

Cummings Plumbing Heating and Cooling is a plumbing and HVAC company based in Tucson, Arizona, whose specialty is repairing and installing residential and commercial plumbing, heating, and cooling systems. Cummings Plumbing has been proudly serving their customers for nearly four decades, having first opened their doors in 1983. Needless to say, they know what they’re doing when it comes to all things plumbing. This makes them the perfect company to provide their expertise on the subject of DIY plumbing. The company highlights what they view as the top three DIY plumbing mistakes. 

Overtightening Connections

According to Cummings Plumbing, the top DIY plumbing mistake is when people over tighten connections. Connections, such as pipes, supply tubes, and fittings, need to be watertight in order to function properly. And so, people think that in order to make them watertight, they should tighten them more than necessary. This is a mistake, as often these connections already come with a watertight seal and tightening them more is not only unnecessary but can actually damage the fittings and break the rubber or plastic washers used to create the seal. Further, tightening a pipe too much can also lead to cracked plastic fittings, which makes the entire thing useless. Such a crack may not occur immediately, but the excessive force caused by the tightening can be enough to weaken it until a few weeks later, it cracks and you’re dealing with a flood. 

Over Relying on Drain Cleaner

Cummings Plumbing Heating and Cooling of Tucson, Arizona, shares the second most common DIY plumbing mistake: over relying on drain cleaner. While chemical drain cleaners can sometimes be effective at eliminating minor clogs, they ultimately do more harm than good when it comes to your pipes. This is because the harsh chemicals drain cleaners contain can significantly damage the pipes and fixtures, especially if you use too much at one time or use it regularly. In addition, if the drain cleaner doesn’t clear up the clog, then it might just be left sitting on top of the drain, which presents a toxic danger to anyone within close contact, even creating a breathing hazard. Instead, when you have a clogged drain, you should either use a drain snake or other barbed drain cleaning tool, or if that isn’t an option, create a concoction out of natural cleaning ingredients, such as vinegar, baking soda, salt, and hot water to ease the problem.

Failing to Turn off the Water

Turning off the water might seem like plumbing 101, but you’d be surprised how many people forget this small but crucial step. Tarizurning off the water should be the very first step in any DIY plumbing project. Failure to do so can result in an expensive disaster, where water sprays from a loosened pipe connection or pours freely out of a pipe after a fixture is removed. Not only will this lead to a huge mess, it can also mean more damage to your house that has to be fixed. In addition, you’ll become so preoccupied with fixing the new problem that it’ll take much longer to fix the original problem you were working on. Further, Cummings Plumbing reminds all DIY plumbers to remember that shutting off the water source doesn’t mean there will magically be no water in your pipes all of a sudden. That is why after shutting it off but before you start working on the plumbing, Cummings Plumbing of Tucson, Arizona, always recommends that you run the kitchen or bathroom faucets for a few seconds to make sure they’re really clear. 

Understanding HVAC Basics in Arizona

Whether you’re a brand new or longtime homeowner, understanding the basics of your home’s HVAC unit is a must. An HVAC system is one of the most important components to a house, especially for households located in extreme climates, such as that of Arizona. 

Cummings Plumbing Heating and Cooling, a plumbing and HVAC company based out of Tucson, Arizona, are experts on the repair and installation of residential and commercial plumbing, heating, and cooling systems. They know how important it is that homeowners have at least a basic understanding of how HVAC systems work, and more importantly, how to keep them running smoothly. They provide a few basic tips that all Arizona homeowners should know about their HVAC. 

Always Keep Your Outdoor Unit Clean

One of the basic tips relating to HVAC systems is to always keep the outdoor unit clean. It doesn’t take much for an outdoor unit to be covered in dirt, leaves, and other debris, but this can lead to issues in the long term. That is why homeowners should regularly clean their outdoor unit. Beyond simply removing any leaves, weeds, or other build up around the unit, clean it with water via a hose. However, be sure that the power to the outdoor unit has been turned off before doing so. In addition, although you can get away with doing this less frequently, Cummings Plumbing Heating and Cooling advises all homeowners to deep clean the inside of the unit as well, removing the panels and giving them a wash.   

Change Your Filter Regularly

Another HVAC 101 tip? Change out your filter regularly. This is one of the easiest and best tips when it comes to keeping your HVAC unit running smoothly. Professionals recommend all homeowners change out their HVAC filter every three months and replace their filters along with the seasons. So, when Summer turns to Fall, it means it’s time to change your filter. In addition to keeping your system running efficiently, a new filter can drastically improve the air quality inside your home. If you like, Cummings Plumbing Heating and Cooling often advises homeowners to change their filter and clean their outdoor unit simultaneously. They can easily be done at the same time and that way, you don’t have to perform maintenance on your unit all the time.

Maintain Your HVAC System

Maintaining your HVAC system is yet another tip for all Arizona homeowners. If you want your HVAC system to last as long as possible, then regular maintenance is a must. Cummings Plumbing recommends scheduling an annual HVAC check-up with an experienced technician. Not only will the technician make sure everything is running smoothly and fix potential kinks, but they are experts at preventative maintenance. This means that they will perform tasks such as cleaning the condensation drain line, which are not necessarily problems but could turn into problems if not dealt with. 

Know When It Should Be Replaced

Lastly, it is critical all Arizona homeowners are able to identify when their HVAC system needs to be replaced. The average lifespan of an HVAC unit is roughly 15 to 20 years. This means that depending on how old your current unit is, it may be time for a replacement sooner rather than later. Cummings Plumbing recommends all new homeowners find out the age of the HVAC system before buying the house, just so that they have all the information. While time is one of the best indicators regarding when to replace your HVAC unit, routine problems are another indicator. If you’re constantly attempting DIY jobs to fix one thing or another, or calling a professional, it might be time for a replacement. Generally speaking, Cummings Plumbing Heating and Cooling of Tucson, Arizona, says that once your system is costing you a decent amount of money in repairs every single month, it’s likely going to be more cost-effective (not to mention less stressful) to replace it. No one ever wants to spend more money repairing a unit than it would cost to get a brand new one.